Switch

: This article is about electrical switches. For other meanings of the word "switch", see Switch (disambiguation).

Contact arrangements

A pair of contacts is said to be 'closed' when there is no space between them, allowing electricity to flow from one to the other. When the contacts are separated by a space, they are said to be 'open', and no electricity can flow.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Switches can be classified according to the arrangement of their contacts. Some contacts are normally open until closed by operation of the switch, while others are normally closed and opened by the switch action. A switch with both types of contact is called a changeover switch.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The terms pole and throw are used to describe switch contacts. A pole is a set of contacts that belong to a single circuit. A throw is one of two or more positions that the switch can adopt. These terms give rise to abbreviations for the types of switch which are used in the electronics industry. In mains wiring names generally involving the word way are used; however, these terms differ between British and American English and the terms two way and three way are used in both with different meanings.

Related Topics:
Mains - British - American - English

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Switches with larger numbers of poles or throws can be described by replacing the "S" or "D" with a number or in some cases the letter T (for triple). In the rest of this article the terms SPST SPDT and intermediate will be used to avoid the ambiguity in the use of the word "way".

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Make-before-break, break-before-make

In a multi-throw switch, there are two possible transient behaviors as you move from one postion to another. In some switch designs, the new contact is made before the old contact is broken. This is known as make-before-break, and ensures that the moving contact never sees an open circuit. The alternative is break-before-make, where the old contact is broken before the new one is made. This ensures that the two contacts are never shorted to each other. Both types of design are in common use, for different applications.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~