Steam engine

A steam engine is a heat engine that makes use of the thermal energy that exists in steam, converting it to mechanical work. Steam engines were used in pumps, locomotive trains, steam ships and steam tractors, and were essential to the Industrial Revolution. They are still used for electrical power generation using steam turbines.

Use and development

The first industrial applications of the vacuum engines were in the pumping of water from deep mineshafts. The Newcomen engine operated by admitting steam to the operating chamber, closing the valve, and then admitting a spray of cold water. The water vapor condenses to a much smaller volume of water, creating a vacuum in the chamber. Atmospheric pressure, operating on the opposite side of a piston, pushes the piston to the bottom of the chamber. In mineshaft pumps, the piston was connected to an operating rod that descended the shaft to a pump chamber. The oscillations of the operating rod are transferred to a pump piston that moves the water, through check valves, to the top of the shaft.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The first significant improvement, 60 years later, was creation of a separate condensing chamber with a valve between the operating chamber and the condensing chamber. This improvement was invented on Glasgow Green, Scotland by James Watt and subsequently developed by him in Birmingham, England, to produce the Watt steam engine with greatly increased efficiency. The next improvement was the replacement of manually operated valves with valves operated by the engine itself.

Related Topics:
Glasgow Green - Scotland - James Watt - Birmingham - Watt steam engine

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Such early vacuum, or condensing, engines are severely limited in their efficiency but are relatively safe since the steam is at very low pressure and structural failure of the engine will be by inward collapse rather than an outward explosion. Their power is limited by the ambient air pressure, the displacement of the working chamber, the combustion and evaporation rates, and the condenser capacity. The maximum theoretical efficiency is limited by the relatively low boiling point of water at near atmospheric pressure (100 °C, 212 °F).

Related Topics:
°C - °F

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The next big improvement in efficiency came with Richard Trevithick's use of pressurized steam, which used a far greater pressure, but more importantly (from a thermodynamic standpoint) operates at a higher temperature differential. But with this added pressure came much danger and many disasters due to exploding boilers and machinery. The most important refinement at this point was the safety valve, which releases excess pressure. Reliable and safe operation came only with a great deal of experience and codification of construction, operating, and maintenance procedures.

Related Topics:
Richard Trevithick - Thermodynamic - Safety valve

~ ~ ~ ~ ~ ~ ~ ~ ~ ~