Steam engine

A steam engine is a heat engine that makes use of the thermal energy that exists in steam, converting it to mechanical work. Steam engines were used in pumps, locomotive trains, steam ships and steam tractors, and were essential to the Industrial Revolution. They are still used for electrical power generation using steam turbines.

Boilers

Boilers are of two main types:

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

• Fire tube construction is typical of early maritime installations for boats and ships and the boilers of steam locomotives. In a fire tube boiler, the hot gases from the firebox (a combustion chamber) are passed through tubes connecting perforated end plates. The gases then enter a smokebox or smoke chest and pass on to a smokestack. The boiler may be vertical or horizontal. For an example of a vertical boiler of this type observe the boiler in the small riverboat used in the movie The African Queen. This type is also used in some boilers that provide steam for steam heating of a building and was also used in the steam shovel. Locomotives and early ships used a horizontal orientation and early ships would usually require a tall smokestack to provide draft, not having a fan to provide a forced draft. In a steam locomotive the draft is generally augmented at startup by directing the steam exhaust through the smokestack, which provides a partial vacuum.
• In a water tube boiler the water is heated in multiple tubes exposed to the hot gases. The tubes are joined to a steam collector chamber at the top. A significant advantage of this type is that there is less chance of catastrophic failure, as there is not a great amount of water in the boiler, nor are there large mechanical elements subject to failure. There may be additional tubes above the collector in the upper portion of the hot gas exhaust - this device, called a superheater, provides additional temperature (and hence pressure) and increases the thermal efficiency of the entire mechanism. Superheaters were also used in some of the later versions of the steam locomotive.

There are also rarer variants, for example the drum boiler used in some steam cars.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

There is also another division between boilers: natural aspiration, which is nearly all of them, and forced-draft, or "pressure-fired" boilers. This technology, equivalent to supercharging for an internal combustion engine, was developed by the Germans and acquired by the US Navy to be used in some frigates built after the Second World War. In it, a fan is used to increase the rate of burning; the boiler must be constructed to get that extra heat to the water. An engine using this kind of boiler has the greatest acceleration from a standing start of any marine powerplant.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~