Oil well
![]() An oil well is a layman's term for any perforation through the Earth's surface designed to find and release both petroleum oil and gas hydrocarbons. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
\n\");}
//-->
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ The well is created by drilling a hole (5 to 30 inches wide) into the earth with an oil rig turning a drill bit. After the hole is drilled, a metal pipe called 'casing' is cemented into the hole. In order to get access to the hydrocarbon producing interval, the casing and cement are either perforated ('cased hole completion') or additional section of earth is drilled below the casing ('open hole completion'). In most cases several casings are set in the well, starting with large shallow casing, and then deeper casings are set in smaller holes drilled through the upper casings. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ To drill the well, ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
The earliest oil wells were drilled percussively, that is, holes were drilled simply by hammering at the earth. Very soon, the limited depths which this method could attain meant that rotary drills were introduced. Modern wells drilled using rotary drills can achieve lengths of over 10 kilometres. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Until the 1970s, most oil wells were vertical (or, more specifically, were supposed to be vertical — deviations introduced by different lithology and mechanical imperfections meant that most wells were at least slightly deviated). However, modern technologies allow strongly deviated wells which can, given sufficient depth, actually become horizontal. This is of great value as the reservoir rocks which contain hydrocarbons are usually horizontal, or sub-horizontal. A well, therefore, which passes along a reservoir (rather than through it, as a vertical well must) can tap a larger volume with a much larger surface area (and thus a correspondingly higher production rate). Using deviated and horizontal drilling, it has also become possible to reach reservoirs several kilometers away from the drilling place (Extended Reach Drilling), allowing to produce hydrocarbons from underneath e.g. environmentally sensitive areas or offshore close to the coast line. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ After drilling the well, 'tubing' (smaller diameter pipe, from 2.5 to 7 inch diameter) is typically run into the well and packed off at the base, inside the casing. The well produces up through the tubing. This arrangement provides a redundant barrier to leaks of hydrocarbons as well as allowing damaged sections to be replaced. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Oil wells can be characterized as ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Petroleum: Petroleum (from Greek petra – rock and oleum – oil), crude oil, sometimes colloquially called black gold, is a thick, dark brown or greenish liquid. A widely believed myth is that the oil itself is flammable, however it is actually the gas that evaporates from the oil that is flammable. ... Oil: Oil is a generic term for organic liquids that are not miscible with water. The name comes from Latin oleum (olive oil).... Gas: :For other meanings see gas (disambiguation).... Oil well related Images and Photos (experimental) | ~ Table of Content ~
\n\");}
//-->
~ Related Subjects ~Oil (2) - Hydrocarbons (2) - Earth (2) - Chemical (1) - Fertilizer (1) - Solvent (1) - Persian (1) - Alkane (1) - Primary energy (1) - Pesticide (1) - Water (1) - Latin (1) - Olive oil (1) - Plastic (1) - Liquids (1) -~ Community ~
| ||||||||||||||||||
Lexicon - Contact us/Report abuse - Privacy Policy - Spiritus-Temporis.com ©2005. - stvers1 - 2012-02-12 - evol2 - 0.49











