Liquid crystal display

:LCD redirects here. For other meanings of LCD, see LCD (disambiguation).

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

[[image:LCD layers.png|thumb|300px|Reflective twisted nematic liquid crystal display.Vertical filter film to polarisation|polarize the light as it enters.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the dark shapes that will appear when the LCD is turned on. Vertical ridges are etched on the surface so the liquid crystals are in line with the polarized light.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Twisted nematic liquid crystals.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Glass substrate with common electrode film (ITO) with horizontal ridges to line up with the horizontal filter.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Horizontal filter film to block/allow through light.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Reflective surface to send light back to viewer.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

]]

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

A liquid crystal display (LCD) is a thin, flat display device made up of any number of color or monochrome pixels arrayed in front of a light source or reflector. It is prized by engineers because it uses very small amounts of electric power, and is therefore suitable for use in battery-powered electronic devices.

Related Topics:
Liquid crystal - Display device - Pixel - Light - Electronic

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Each pixel (picture element) consists of a column of liquid crystal molecules suspended between two transparent electrodes, and two polarizing filters, the axes of polarity of which are perpendicular to each other. Without the liquid crystals between them, light passing through one would be blocked by the other. The liquid crystal twists the polarization of light entering one filter to allow it to pass through the other.

Related Topics:
Molecule - Transparent electrodes - Polarizing

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The molecules of the liquid crystal have electric charges on them. By applying small electrical charges to transparent electrodes over each pixel or subpixel, the molecules are twisted by electrostatic forces. This changes the twist of the light passing through the molecules, and allows varying degrees of light to pass (or not pass) through the polarizing filters.

Related Topics:
Electrical charges - Pixel - Subpixel

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Before applying an electrical charge, the liquid crystal molecules are in a relaxed state. Charges on the molecules cause these molecules to align themselves in a helical structure, or twist (the "crystal"). In some LCDs, the electrode may have a chemical surface that seeds the crystal, so it crystallizes at the needed angle. Light passing through one filter is rotated as it passes through the liquid crystal, allowing it to pass through the second polarized filter. A small amount of light is absorbed by the polarizing filters, but otherwise the entire assembly is transparent.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

When an electrical charge is applied to the electrodes, the molecules of the liquid crystal align themselves parallel to the electric field, thus limiting the rotation of entering light. If the liquid crystals are completely untwisted, light passing through them will be polarized perpendicular to the second filter, and thus be completely blocked. The pixel will appear unlit. By controlling the twist of the liquid crystals in each pixel, light can be allowed to pass though in varying amounts, correspondingly illuminating the pixel.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Many LCDs are driven to darkness by an alternating current, which disrupts the twisting effect, and become light or transparent when no current is applied.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

To save cost in the electronics, LCDs are often multiplexed. In a multiplexed display, electrodes on one side of the display are grouped and wired together, and each group gets its own voltage source. On the other side, the electrodes are also grouped, with each group getting a voltage sink. The groups are designed so each pixel has a unique, unshared combination of source and sink. The electronics, or the software driving the electronics then turns on sinks in sequence, and drives sources for the pixels of each sink.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Important factors to consider when evaluating an LCD monitor include resolution, viewable size, response time (sync rate), matrix type (passive or active), viewing angle, color support, brightness and contrast ratio, aspect ratio, and input ports (e.g. DVI or VGA).

Related Topics:
Resolution - Response time - Matrix type - Contrast - DVI - VGA

~ ~ ~ ~ ~ ~ ~ ~ ~ ~