Helicopter

A helicopter is an aircraft which is lifted and propelled by one or more horizontal rotors (propellers). Helicopters are classified as rotary-wing aircraft to distinguish them from conventional fixed-wing aircraft. The word helicopter is derived from the Greek words helix (spiral) and pteron (wing). The engine-driven helicopter was invented by the Slovak inventor Jan Bahyl. The first stable, fully-controllable helicopter placed in production was invented by Igor Sikorsky.

Generating lift

A conventional aircraft is able to fly because the forward motion of its angled wings forces air downwards, creating an opposite reaction called lift that forces the wings upwards. A helicopter uses exactly the same method, except that instead of moving the entire aircraft, only the wings themselves are moved. The helicopter's rotor can simply be regarded as rotating wings.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

There are several possible design layouts for arranging a helicopter's rotors. The most common design is the Sikorsky-layout, which is used by approximately 95% of all helicopters manufactured to date. It is as follows: turning the rotor generates lift but it also applies a reverse force to the vehicle, which would spin the helicopter fuselage in the opposite direction to the rotor. At low speeds, the most common way to counteract this torque is to have a smaller vertical propeller mounted at the rear of the aircraft called a tail rotor. This rotor creates thrust which is in the opposite direction from the torque generated by the main rotor. When the thrust from the tail rotor is sufficient to cancel out the torque from the main rotor, the helicopter will not rotate around the main rotor shaft.

Related Topics:
Sikorsky - Torque

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The worlds largest and smallest series produced helicopters follow this principle. The Mil Mi-26 can lift 27 metric tons, the Robinson R22 has a crew of two and a gross weight of 1300 lbs. Almost all civilian helicopters have the main rotor and tail rotor system. The world's fastest helicopter, the Westland Lynx can perform aerobatic loops and rolls with this conventional rotor system.

Related Topics:
Mil Mi-26 - Robinson R22 - Westland Lynx - Aerobatic

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Sometimes the blades of a tail rotor are not separated by the same angle, but laid out in an X-shape, which is supposed to reduce the noise levels for military use (e.g. AH-64 Apache). If the tail rotor is shrouded (i.e., a fan embedded in the vertical tail) it is called a fenestron. The fenestron rotor system on the model EC120 helicopter uses a shaft driven system and gearbox to turn the fan. It is less efficient but the advantages are less noise is generated, it's safer for people that may walk near it and there is less chance of the blades being damaged by objects because it's shrouded, unlike the traditional tail rotor. Other helicopters use a Notar (an acronym meaning no tail rotor) design: they blow air through a long slot along the tail boom, utilizing the Coanda effect to produce forces to counter the torque. Notars adjust thrust by opening and closing a sliding circular cover near the end of the tail boom.

Related Topics:
AH-64 Apache - Fenestron - Notar - Coanda effect

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The amount of power required to prevent a helicopter from spinning is significant. A tail rotor can use up to 30% of the engine's power, and this power does not help the helicopter produce lift or forward motion. To reduce this waste during cruise, the vertical stabilizer is often angled to produce a force which helps counter the main rotor torque. At high speeds, it is possible for the vertical stabilizer to counteract the entire torque, leaving more power available for forward flight. This is commonly known as slip-streaming and can make hovering turns difficult on windy days. Another reason for the angled vertical stabilizer is to make it possible to stage a successful high-speed, run-on landing, in case of the tail rotor failure or damage.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Many millitary helicopters, especially attack types, have short wings called stub wings to add lift. They are also used as external mounts for weapons. In extreme cases, such as that of the Mil Mi-24, the wings are large enogh to obstruct airflow down from the rotors, making the helicopter all but unable to hover.

Related Topics:
Stub wings - Mil Mi-24

~ ~ ~ ~ ~ ~ ~ ~ ~ ~