Force

In physics, a force is an external cause responsible for any change of a physical system. For instance, a person holding a dog by a rope is experiencing the force applied by the rope on his hand, and the cause for its pulling forward is the force exercised by the rope. The kinetic expression of this change is, according to Newton's second law, acceleration, non kinetic expressions such as deformation can also occur. The SI unit for force is the newton.

Units of measurement

The SI unit used to measure force is the newton (symbol N), which is equivalent to kg·m·s−2.

Related Topics:
SI - Newton

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Non-SI units of force and mass

The F=m·a relationship can be used with any consistent units (SI or CGS). If these units are not consistent, a more general form, F=k·m·a, can be used, where the constant k is a conversion factor dependent upon the units being used.

Related Topics:
SI - CGS

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

For example, in imperial engineering units, F is measured in "pounds force" or "lbf", m in "pounds mass" or "lb", and a in feet per second squared. In this particular system, one needs to use the more general form above, usually written F=m·a/gc with the constant normally used for this purpose gc = 32.174 lb·ft/(lbf·s2) equal to the reciprocal of the k above.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

As with the kilogram, the pound is colloquially used as both a unit of mass and a unit of force. 1 lbf is the force required to accelerate 1 lb at 32.174 ft per second squared, since 32.174 ft per second squared is the standard acceleration due to terrestrial gravity.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Another imperial unit of mass is the slug, defined as 32.174 lb. It is the mass that accelerates by one foot per second squared when a force of one lbf is exerted on it.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

When the standard gee (an acceleration of 9.80665 m/s²) is used to define pounds force, the mass in pounds is numerically equal to the weight in pounds force. However, even at sea level on Earth, the actual acceleration of free fall is quite variable, over 0.53% more at the poles than at the equator. Thus, a mass of 1.0000 lb at sea level at the equator exerts a force due to gravity of 0.9973 lbf, whereas a mass of 1.000 lb at sea level at the poles exerts a force due to gravity of 1.0026 lbf. The normal average sea level acceleration on Earth (World Gravity Formula 1980) is 9.79764 m/s², so on average at sea level on Earth, 1.0000 lb will exerts a force of 0.9991 lbf.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The equivalence 1 lb = 0.453 592 37 kg is always true, by definition, anywhere in the universe. If you use the standard gee which is official for defining kilograms force to define pounds force as well, then the same relationship will hold between pounds-force and kilograms-force (an old non-SI unit is still used). If a different value is used to define pounds force, then the relationship to kilograms force will be slightly different—but in any case, that relationship is also a constant anywhere in the universe. What is not constant throughout the universe is the amount of force in terms of pounds-force (or any other force units) which 1 lb will exert due to gravity.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

By analogy with the slug, there is a rarely used unit of mass called the "metric slug". This is the mass that accelerates at one metre per second squared when pushed by a force of one kgf. An item with a mass of 10 kg has a mass of 1.01972661 metric slugs (= 10 kg divided by 9.80665 kg per metric slug). This unit is also known by various other names such as the hyl, TME (from a German acronym), and mug (from metric slug).

Related Topics:
Kgf - Hyl

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Another unit of force called the poundal (pdl) is defined as the force that accelerates 1 lbm at 1 foot per second squared. Given that 1 lbf = 32.174 lb times one foot per second squared, we have 1 lbf = 32.174 pdl.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

In conclusion, we have the following conversions:

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

• 1 kgf (kilopond kp) = 9.80665 newtons
• 1 metric slug = 9.80665 kg
• 1 lbf = 32.174 poundals
• 1 slug = 32.174 lb
• 1 kgf = 2.2046 lbf

The kilogram-force is a unit of force that was used in various fields of science and technology. In 1901, the CGPM improved the definition of the kilogram-force, adopting a standard acceleration of gravity for the purpose, and making the kilogram-force equal to the force exerted by a mass of 1 kg when accelerated by 9.80665 m/s². The kilogram-force is not a part of the modern SI system, but is still used in applications such as:

Related Topics:
Kilogram-force - CGPM - SI

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

• Thrust of jet and rocket engines
• Spoke tension of bicycles
• Draw weight of bows
• Torque wrenches in units such as "meter kilograms" or "kilogram centimetres" (the kilograms are rarely identified as units of force)
• Engine torque output (kgf·m expressed in various word orders, spellings, and symbols)
• Pressure gauges in "kg/cm²" or "kgf/cm²"

In colloquial, non-scientific usage, the "kilograms" used for "weight" are almost always the proper SI units for this purpose. They are units of mass, not units of force.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The symbol "kgm" for kilograms is also sometimes encountered. This might occasionally be an attempt to disintinguish kilograms as units of mass from the "kgf" symbol for the units of force. It might also be used as a symbol for those obsolete torque units (kilogram-force metres) mentioned above, used without properly separating the units for kilogram and metre with either a space or a centered dot.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~