Drill bit

Drill bits are the cutters of drill tools. Bits are interchangeable, meaning that they can be removed from the end of the drill, either to replace a worn part or to change the size of the part.

Gimlet bit

The gimlet bit is a very old design. The bit is the same style as that used in the gimlet, a self-contained tool for boring small holes in wood by hand. Since about 1850, gimlets have had a variety of cutter designs, but some are still produced with the original version. The gimlet bit is intended to be used in a hand brace for drilling into wood. It is the usual style of bit for use in a brace for holes below about 7 mm diameter.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The tip of the gimlet bit acts as a tapered screw, to draw the bit into the wood and to begin forcing aside the wood fibres, without necessarily cutting them. The cutting action occurs at the side of the broadest part of the cutter. Most drills cut the base of the hole. The gimlet bit cuts the side of the hole.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The gimlet bit in the photos was made sometime before 1950.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Image:drill gimlet.jpg|gimlet bit for wood

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Image:drill tip gimlet.jpg|gimlet bit tip detail

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

~ ~ ~ ~ ~ ~ ~ ~ ~ ~