Baseball

Baseball is a team sport, a bat-and-ball game, in which a hard, fist-sized ball is thrown by a defensive player called a pitcher, and an offensive player called a batter attempts to hit it with a tapered, cylindrical, smooth stick called a bat. The ball itself is also called a baseball. Scoring is accomplished by the batter running and touching a series of four markers on the ground called bases.

Gameplay

A simplified version of the rules of baseball is at simplified baseball rules. Also visit www.mlb.com, the official web site of Major League Baseball in the United States, where you can view clips of baseball being played.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

General structure

Baseball is played between two teams of nine players each on a baseball field, usually under the authority of one or more officials, called umpires. There are usually four umpires in major league games; up to six (and as few as one) may officiate depending on the league and the importance of the game. There are four bases. Numbered counter-clockwise, first, second and third bases are cushions (sometimes informally referred to as bags) shaped as 15 in (38 cm) squares which are raised a short distance above the ground; together with home plate, the fourth "base," they form a square with sides of 90 ft (27.4 m) called the diamond. Home base (plate) is a pentagonal rubber slab known as simply home. The field is divided into two main sections: the infield containing the four bases is bounded by the foul line and the grass line (see figure); and the outfield which is the grassed area beyond the infield grass line, between the foul line, and bounded by a wall or fence. The area between the foul lines, including the foul lines (the foul lines are in fair territory), is fair territory, and the area outside the foul lines is foul territory.

Related Topics:
Baseball field - Umpire - Bases - Counter-clockwise - In - Cm - Home plate - Ft - M - Diamond

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The game is played in nine innings in which each team gets one turn to bat and try to score runs while the other pitches and defends in the field. In baseball, the defense always has the ball -- a fact that differentiates it from most other team sports. The teams switch every time the defending team gets three players of the batting team out. The winner is the team with the most runs after nine innings. In the case of a tie, additional innings are played until one team comes out ahead. At the start of the game, all nine players of the home team play the field, while players on the visiting team come to bat one at a time.

Related Topics:
Innings - Bat - Runs - Out

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The basic contest is always between the pitcher for the fielding team, and a batter. The pitcher throws—pitches—the ball towards home plate, where the catcher for the fielding team waits to receive it. The batter stands in one of the batter's boxes and tries to hit the ball with a bat. The pitcher must keep one foot in contact with the top or side of the pitcher's rubber?a 24" x 6" (~ 61 cm x 15 cm) plate located atop the pitcher's mound?during the entire pitch, so he can only take one step forward in delivering the ball. The catcher's job is to receive any ball that the batter misses or does not swing at, and, most importantly, to "call" the game by a series of hand movements that signal to the pitcher what pitch to throw and where. If the pitcher disagrees with the call, he will "shake off" the catcher by shaking his head no; he accepts the sign by nodding. The catcher's role becomes more crucial depending on how the game is going, and how the pitcher responds to a given situation. Each pitch begins a new play, which might consist of nothing more than the pitch itself.

Related Topics:
Pitcher - Batter - Pitches - Catcher - Batter's boxes

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Each half-inning, the goal of the defending team is to get three members of the other team out. A player who is out must leave the field and wait for his next turn at bat. There are many ways to get batters and baserunners out; some of the most common are catching a batted ball in the air, tag outs, force outs, and strikeouts. After the fielding team has put out three batters, that half of the inning is over and the team in the field and the team at bat switch places; there is no upper limit to the number that may bat in rotation before three outs are recorded. Going through the entire order in an inning is referred to as "batting around". It is indicative of a high scoring inning. A complete inning consists of each opposing side having a turn (three outs) on offense.

Related Topics:
At bat - In the air - Tag out - Force out - Strikeout

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The goal of the team at bat is to score runs; a player may do so only by batting, then becoming a base runner, touching all the bases in order (via one or more plays), and finally touching home plate. To that end, the goal of each batter is to enable baserunners to score or to become a baserunner himself. The batter attempts to hit the ball into fair territory—between the baselines—in such a way that the defending players cannot get them or the baserunners out. In general, the pitcher attempts to prevent this by pitching the ball in such a way that the batter cannot hit it cleanly or, ideally, at all.

Related Topics:
Becoming a base runner - Baserunners - Fair territory

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

A baserunner who successfully touches home plate after touching all previous bases in order scores a run. In an enclosed field, a fair ball hit over the fence on the fly is normally an automatic home run, which entitles the batter and all runners to touch all the bases and score. A home run hit with all bases occupied ('bases loaded') is called a grand slam.

Related Topics:
Run - Fair ball - Home run

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Fielding team

See also: Baseball positions | Baseball positioning

Related Topics:
Baseball positions - Baseball positioning

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The team in the field is the defensive team; they attempt to prevent the team at bat from scoring. There are nine defensive positions, however, only two of the positions have a mandatory location (pitcher and catcher), the locations of the other fielders is not specified by the rules. These fielders often shift their positioning in response to specific batters or game situations, and they may exchange positions with one another at any time. The nine positions are: pitcher, catcher, first baseman, second baseman, third baseman, shortstop, left fielder, center fielder, and right fielder. Each position is labeled which a number starting with the pitcher (1), catcher (2), first baseman (3), second baseman (4), third baseman (5), shortstop (6), left fielder (7), center fielder (8), right fielder (9).

Related Topics:
Team at bat - Positioning

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The battery

The battery is the pitcher, who stands on the rubber of the mound, and the catcher, who squats behind home plate.

Related Topics:
Battery - Pitcher - Catcher

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The pitcher's main role is to pitch the ball toward home plate with the goal of getting the batter out. Pitchers also play defense by fielding batted balls, covering bases (for a potential tag out or force out on an approaching runner), or backing up throws. The catcher's main role is to receive the pitch if the batter does not hit it. Together with the pitcher and coaches, the catcher plots game strategy by suggesting different pitches and by shifting the starting positions of the other fielders. Catchers are also responsible for defense in the area near home plate.

Related Topics:
Pitch - Out - Covering bases - Tag out - Force out

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The infielders

The four infielders are the first baseman, second baseman, shortstop, and third baseman. The first and third basemen play near their respective bases. The second baseman and the shortstop position themselves in the gaps on either side of second base, toward first and third base, respectively. Originally, the second baseman played very close to second base; this positioning shifted when teams found it necessary to have four infielders, rather than four outfielders.

Related Topics:
First baseman - Second baseman - Shortstop - Third baseman

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The first baseman's job consists largely of making force plays at first base on ground balls hit to the other infielders. When an infielder picks up a ball from the ground, he must throw it to the first baseman for the runner to be out. The first baseman also fields balls hit near first base, but because the position is less demanding than the others, the team's strongest hitter is often also their first baseman. The second baseman covers the area to the right of second base and provides backup for the first baseman. The shortstop fills the critical gap between second and third bases—where right-handed batters generally hit ground balls—and also covers second or third base and the near part of left field. This position is the most demanding defensively, so a good shortstop need not necessarily be a good batter. The third baseman's primary requirement is a strong throwing arm, in order to make the long throw across the infield to the first baseman. Quick reaction time is also important for third basemen, as they tend to see more sharply hit balls than the other infielders.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

The outfielders

The three outfielders, left fielder, center fielder, and right fielder, are so named from the catcher's perspective (from home plate looking onto the field). The right fielder generally has the strongest arm of all the outfielders due to the need to make throws on runners attempting to take third base. The center fielder has more territory to cover than the corner outfielders, so this player must be quick and agile with a strong arm to throw balls in to the infield; as with the shortstop, teams tend to emphasize defense at this position. Also, the center fielder is considered the outfield leader, and left- and right-fielders should cede to his direction when fielding fly balls.

Related Topics:
Left fielder - Center fielder - Right fielder - Fly ball

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Defensive strategy

Pitching

Main article: Pitching

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Effective pitching is vitally important to a baseball team, as pitching is the key for the defensive team to retire batters and to preventing runners from getting on base. A full game usually involves over one hundred pitches thrown by each team. However, most pitchers begin to tire before they reach this point. In previous eras, pitchers would often throw up to four complete games (all nine innings) in a week. With new advances in medical research and thus a better understanding of how the human body functions and tires out, pitchers tend to throw fractions of a game about every five days.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Multiple pitchers are often needed in a single game, including the starting pitcher and relief pitcher(s). Pitchers are substituted for one another like any other player (see below), and the rules do not limit the number of pitchers that can be used in a game. Relief pitchers were uncommon in baseball's early years, with the starter normally remaining for the entire game; today, over the course of a single game, each team will most commonly use two to five pitchers.

Related Topics:
Starting pitcher - Relief pitcher

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Although a pitcher can only take one step forward while delivering the ball, the pitcher has a great arsenal at his disposal in the variation of location, velocity, movement, and arm location (see types of pitches). Most pitchers attempt to master two or three types of pitches; some pitchers command control over up to 6 types of pitches. Common pitches include a fastball, which is the ball thrown at a maximum velocity; a curveball, which is made to curve by rotation imparted by the pitcher; and a change-up, which is a slower version of a fastball.

Related Topics:
Types of pitches - Fastball - Curveball

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

To illustrate pitching strategy, consider the "fastball/change-up" combination: The average major-league pitcher can throw a fast ball around 90 miles per hour (145 km/h), and a few pitchers have even exceeded 100 miles per hour (161 km/h). The change-up is thrown somewhere between 75 to 85 miles per hour (121 to 137 km/h). Since the batter's timing is critical to hitting a pitch, a batter swinging to hit what looks like a fast ball, would be terribly fooled (swing and miss, hopefully) when the pitch turns out to be a much slower change up.

Related Topics:
Miles per hour - Change-up

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Some pitchers choose to throw using the 'submarine style,' a very efficient sidearm motion. Pitchers with a sidearm delivery are often very difficult to hit, but can be erratic with control of their pitches.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Fielding strategy

Since only the pitcher and catcher location is fixed, the other players on the field move around as needed to defend against scoring a run. Many variations of this are possible, as location depends upon the "situation." "Situation" refers to immediate circumstances of play, and includes: the number of outs, the count (balls and strikes) on the batter, the number and speed of runners, the ability of the fielders, the ability of the pitcher, the type of pitch thrown, the inning, home versus visiting team, and others. As the situation dictates, the fielders move to more strategic locations. Common defensive situations include: playing for the bunt, trying to prevent a stolen base (runner advancing to the next base), moving the defensive to a shallow position to throw out a runner at home, moving fielders to locations where hitters are most likely to hit the ball, etc.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Team at bat

Batters and runners

The ultimate goal of the team at bat is to score runs. To accomplish this feat, the team at bat successively (in an predetermined order called a lineup) sends its nine players to the batter's box (adjacent to home plate) where they become batters. (Each team sets its batting lineup at the beginning of the game. Changes to the lineup are tightly limited by the rules of baseball and must be communicated to the umpires and to the opposing team. See Substitutions below.)

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

A batter's turn at the plate is called a plate appearance. Batters advance to the bases in a variety of ways: hits, walks, hit-by-pitch, and a few others. When the batter hits a fair ball, he must run to first base, and may continue or stop at any base unless he is put out. A successful hit occurs when the batter reaches a base: reaching only first base is a single; reaching second base, a double; third base, a triple; and hit that allows the batter to touch all bases in order on the same play is a home run, whether or not the ball is hit over the fence. Once a runner is held to a base, he may attempt to advance at any time, but is not required to do so unless the batter or another runner displaces him (called a force play). A batter always drops his bat when running the bases —otherwise, the bat would slow him down and also be a danger to fielders.

Related Topics:
Plate appearance - Home run

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Depending on the way the ball comes off the bat, the play has different names. A batted ball is called a fly ball if it was hit in the air in a way causing the fielder to catch it on its descent. A line drive is like a fly ball, but the ball is hit with such force that its trajectory seems level to the ground. A batted ball which is not hit into the air, and which touches the ground within the infield before it can be caught, is called a ground ball. When a ball is hit outside the foul line, it is a foul ball, requiring the batter and all runners to return to their respecitive bases.

Related Topics:
Different names - Fly ball - Line drive - Ground ball

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Once the batter and any existing runners have all stopped at a base or been put out, the ball is returned to the pitcher, and the next batter comes to the plate. After the opposing team bats in its own order and three more outs are recorded, the first team's batting order will continue again from where it left off.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

When a runner reaches home plate, they score a run and are no longer a base runner. They must leave the playing area until their spot in the order comes up again. A runner may only circle the bases once per plate appearance and thus can score no more than a single run.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Batting

Main article: Batting (baseball)

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Each plate appearance consists of a series of pitches, in which the pitcher throws the ball towards home plate while a batter is standing in the batter's box. With each pitch, the batter must decide whether or not to swing the bat at the ball in an attempt to hit it. The pitches arrive quickly, so the decision to swing must be made in less than a second, based on whether or not the ball is hittable and in the strike zone, a region defined by the area directly above home plate and between the batter's knees and underarms. In addition to swinging at the ball, a batter who wishes to put the ball in play may hold his bat over home plate and attempt to tap a pitch lightly; this is called a bunt.

Related Topics:
Plate appearance - Pitcher - Batter's box - Strike zone - Bunt

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

On any pitch, if the batter swings at the ball and misses, he is charged with a strike. If the batter does not swing, the home plate umpire judges whether or not the ball passed through the strike zone. If the ball passed through the zone, it is ruled a strike; otherwise, it is called a ball. The number of balls and strikes thrown to the current batter is known as the count; the count is always given balls first, then strikes (such as 3-2 or "three and two", which would be 3 balls and 2 strikes).

Related Topics:
Strike - Umpire - Ball - Count

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

If the batter swings and makes contact with the ball, but does not put it in play in fair territory—a foul ball—he is charged with an additional strike, except when there are already two strikes. Thus, a foul ball with two strikes leaves the count unchanged. (However, a noted exception to this rule is a ball bunted foul with two strikes always counts as a strike.) If a pitch is batted foul or fair and a member of the defensive team is able to catch it, before the ball strikes the ground, the batter is declared out. In the event that a bat contacts the ball, but the ball continues sharply and directly to the catcher's mitt and is caught, it is a foul tip, which is same as an ordinary strike.

Related Topics:
Foul ball - Foul tip

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

When three strikes occur on a batter, it is a strikeout and the batter is out except in some circumstances when the pitch is not caught by the catcher (a violation of the third strike rule{{ref|ThirdStrikeRule}}).

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

On the fourth ball the batter becomes a runner, and is entitled to advance to first base without risk of being put out, called a base on balls or a walk (abbreviated BB). If a pitch touches the batter, the umpire can declare a hit by pitch (abbreviated HBP) and the batter is awarded first base, unless the umpire determines that the ball was in the strike zone when it hit the batter, or that the batter did not attempt to avoid being hit.

Related Topics:
Ball - Base on balls - Hit by pitch

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Base running

Main article: Baserunning

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Once a batter becomes a runner, he is said to be "on" that base until he attempts to advance to the next base, until he is put out, or until the half-inning ends. Runners on second or third base are considered to be in scoring position since ordinary hits, even singles, will often score them.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

A runner legally touching a base is "safe"—he may not be put out. Runners may attempt to advance from base to base at any time (except during time outs), but must advance on any fair ball that touches the ground. When a ball is hit in the air, a fly ball, and caught by the defending team, runners must return and touch the base they occupied at the time of the pitch—called tagging up—after the ball is caught. Once they do this, they may attempt to advance at their own risk.

Related Topics:
Time of the pitch - Tagging up

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Baserunners may attempt to advance, or steal a base, while the pitcher is throwing a pitch. The pitcher, in lieu of delivering the pitch, may try to prevent this by throwing the ball to one of the infielders in order to tag the runner; if successful, it is called a pick-off. If the runner attempts to steal the next base but is tagged out before reaching it safely, he is caught stealing. An illegal attempt by the pitcher to throw a runner out is called a balk, allowing the runners to advance without risk of being put out.

Related Topics:
Steal a base - Balk

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Batting and base running strategy

The goal of each batter is to become a base runner himself (usually by a safe hit or a base on balls), or to help move other base runners along. Batters attempt to "read" pitchers through pre-game preparation by studying the tendencies of pitchers and by talking to other batters that previously faced the pitcher. While batting, batters attempt to "read" pitches by looking for clues that the pitcher or catcher reveal. These clues include movements of the pitchers arms, shoulders, body, etc, and an attempt to "read" the spin of a ball early in the pitch to anticipate its trajectory. Batters also remain keenly aware of the count during their at bat. When the count is in the batter's favor (like 2-0), the batter is more likely to take a risky swing, but when the count is in the pitcher's favor (like 0-2), the batter will take a more conservative swing.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

In general, base running is a tactical part of the game requiring good judgment by runners (and their coaches) to assess the risk in attempting to advance. During tag plays, a good slide can affect the outcome of the play. Managers will often simultaneously send a runner and require the batter to swing (a hit-and-run play) in an attempt to advance runners.

Related Topics:
Tag - Slide

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

During the course of play many offensive and defensive players run close to each other, and during tag plays, the defensive player must touch the offensive player. Although baseball is considered a non-contact sport; a runner may be allowed to make potentially dangerous contact with a fielder as part of an attempt to reach a base, unless that fielder is fielding a batted ball. (Noted exceptions to the dangerous contact rule are found throughout amateur competions, including youth leagues, high school, and college baseball.) A good slide is often more advantageous than such contact, and "malicious" contact by runners is typically prohibited as offensive interference. The most common occurence of contact of this nature is at home plate between the runner and the catcher, as the catcher is well padded and locked into position on or near the plate, and the runner will often try to knock the ball out of the catchers hand. Since the catcher is seen (symbolically and literally) as the last line of defense, it seems natural that the more physical play happens here.

Related Topics:
Tag - Non-contact - Interference

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Innings and determining a winner

An inning consists of each team having one turn in the field and one turn to hit, with the visiting team batting before the home team. A standard game lasts nine innings, although some leagues (such as minor leagues and high school baseball) use seven-inning games. The team with the most runs at the end of the game wins. If the home team is ahead after eight-and-a-half innings have been played, it is declared the winner, and the last half-inning is not played. If the home team is trailing or tied in the last inning and they score to take the lead, the game ends as soon as the winning run touches home plate; however, if the last batter hits a home run to win the game, he and any runners on base are all permitted to score.

Related Topics:
Inning - Minor leagues

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

If both teams have scored the same number of runs at the end of a regular-length game, a tie is avoided by the addition of extra innings. As many innings as necessary are played until one team has the lead at the end of an inning. Thus, the home team always has a chance to respond if the visiting team scores in the top half of the inning; this gives the home team a small tactical advantage. In theory, a baseball game could go on forever; in practice, however, they eventually end. In Major League Baseball the longest game played was a 26-inning affair between the Brooklyn Robins and Boston Braves on May 1, 1920. The game ended in a 1-1 tie called on account of darkness.

Related Topics:
Tie - Extra innings - Major League Baseball - Brooklyn Robins - Boston Braves - May 1 - 1920

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

In Major League Baseball, games end with tie scores only because conditions have made it impossible to continue play. A tie game does not count as an official game in the standings unless it is finished later or replayed; however, individual player statistics from tie games are counted. Inclement weather may also shorten games, but at least five innings must be played for the game to be considered official; four-and-a-half innings are enough if the home team is ahead. Previously, curfews and the absence of adequate lighting caused more ties and shortened games.

Related Topics:
Major League Baseball - Curfew

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

In Japanese baseball, if the score remains tied after nine innings, up to three extra innings may be played before the game is called a tie. Some youth or amateur leagues will end a game early if one team is ahead by ten or more runs, a practice known as the "mercy rule" or "slaughter rule". Rarely, a game can also be won or lost by forfeit.

Related Topics:
Japanese baseball - Slaughter rule - Forfeit

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

There is a short break between each half-inning during which the new defensive team takes the field and the pitcher warms up. Traditionally, the break between the top half and the bottom half of the seventh inning is known as the seventh-inning stretch. During the "stretch," fans often sing the chorus of "Take Me Out to the Ball Game."

Related Topics:
Seventh-inning stretch - Take Me Out to the Ball Game

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Substitutions

Each team is allowed to substitute for any player at any time, but no player, once removed from the game, may return. A batter who replaces another batter is referred to as a pinch hitter; similarly, a pinch runner may be used as a replacement for a baserunner. Any replacement is a permanent substitution; the replaced player may not return to the game.

Related Topics:
Pinch hitter - Pinch runner

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

It is common for a pitcher to pitch for several innings and then be removed in favor of a relief pitcher. Because pitching is a specialized skill, most pitchers are relatively poor hitters; it is common to substitute for a pitcher when he is due to bat. This pinch hitter is typically then replaced by a relief pitcher when the team returns to the field on defense, but more complicated substitutions are possible, most notably the double switch.

Related Topics:
Relief pitcher - Double switch

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Many amateur leagues allow a starting player who was removed to return to the game in the same position in the batting order under a re-entry rule. Youth leagues often allow free and open substitution to encourage player participation.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Most leagues, notably Major League Baseball's American League, allow a designated hitter, a player whose sole purpose is to hit when it would normally be the pitcher's turn. This is not considered a substitution but rather a position, albeit a purely offensive one. A designated hitter does not play in the field on defense and may remain in the game regardless of changes in pitchers.

Related Topics:
Major League Baseball - American League - Designated hitter

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Rosters

Main article: Major League Baseball transactions

~ ~ ~ ~ ~ ~ ~ ~ ~ ~

During the course of a game, each baseball team has players that are an active part of the game, called "in the game," and players that are not, called "on the bench." The players on the bench are needed in case of injuries and to make strategic pitching, fielding, and batting substitutions. To keep the game fair, each team is limited to a fixed number of players. That number is dictated by the rules of the game, see Major League Baseball transactions for those limitations.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~